5.11.5.2 Advanced Settings
Background Information
This function is supported on select wireless models.
You can configure IP address, subnet mask, default gateway, DHCP server of the Device.
Procedure
Step 1
Select Main Menu > NETWORK > Wi-Fi AP > Advanced.
Step 2
Configure parameters.
Parameter
IP Address
Subnet Mask
Default Gateway
Start IP
Figure 5-185 Advanced settings
Table 5-54 Parameters of advanced settings
Description
Set IP address, subnet mask and default gateway for the Wi-Fi of
NVR.
IP address and default gateway must be on the same network
segment.
Set the start IP address and end IP address of the DHCP server.
227
User's Manual