Changing Ip Address Of Remote Device - Dahua N41C1P User Manual

2) Cancel the selection of the On checkbox to disable backup encryption, and then
click OK.
● If Backup Encryption is enabled, the file format is .backup.
● If Backup Encryption is disabled, the file format is .csv. Keep unencrypted files
3) Select the storage path and then click Save.
● The template file is named RemoteConfig_20220222191255.csv.
● The template includes the IP address, port, remote channel No.,
Step 3 Fill in the template and then save the file.
Do not change the file extension of the template. Otherwise, the template cannot
be imported.
Step 4 Click Import, select the template file and then open it.
The remote devices in the template are added to the NVR. If the remote device in
the template has been added, the system will prompt you whether to replace the
existing one on the device list.
● If you select Yes, the system deletes the existing one and import the device
again.
● If you select No, the system retains the existing one and add the device to
another unoccupied channel.

5.7.3 Changing IP Address of Remote Device

The procedures to change the IP addresses of connected and unconnected cameras are
different.
Figure 5-57 Backup encryption
well to avoid data leakage.
20220222191255 represents the export time.
manufacturer, username, password and other information.
86
User's Manual