Importing Cameras - Dahua N41C1P User Manual

Parameter
RTSP Port
HTTP Port
TCP Port
Username
Password
Total Channels
Remote CH No.
Decode Strategy
Protocol Type
Encryption
Step 5 Click OK.

5.7.2.3 Importing Cameras

Background Information
You can import remote devices in batches.
We recommend this method when you want to add lots of remote devices whose IP
addresses, usernames and passwords are not the same.
Procedure
Step 1 Select Main Menu > CAMERA > Camera List > Camera List.
Step 2 Export the template.
The exported template includes the information of the added remote device. Pay
attention to your data security.
1) Click Export.
Description
Enter the RTSP port number. The default value is 554.
Enter the HTTP port number. The default value is 80.
The default value is 37777. You can enter the value as needed.
Enter the username of the remote device.
Enter the password of the user for the remote device.
Click Connect to get the total number of channels of the
remote device.
Enter the remote channel number of the remote device.
Select Default, Realtime, or Fluent.
● If the remote device is added through private protocol,
the default type is TCP.
● If the remote device is added through ONVIF protocol,
the system supports Auto, TCP, UDP, or MULTICAST.
● If the remote device is added through other
manufacturers, the system supports TCP and UDP.
If the remote device is added through ONVIF protocol, select
the Encrypt checkbox and then the system will provide
encryption protection to the data being transmitted.
To use this function, make sure that the HTTPS function is
enabled for the remote IP camera.
85
User's Manual