Configuring In Area No - Dahua N41C1P User Manual

Parameter
OSD
Setting
Step 6 Click
alarm linkage, see Table 5-43.
Step 7 Click Apply.

5.9.11.3 Configuring In Area No.

Background Information
When the number of people in the detection area is larger or lower than the defined
threshold, or when the staying period exceeds the defined duration, an alarm is triggered.
Procedure
Step 1 Select Main Menu > Analytics+ > Parameters > People Counting > People
Counting.
Table 5-42 People counting parameters
Description
● Select Enter No., and then the number of people entering the
detection zone will be displayed on the live page.
● Select Exit No., and then the number of people leaving the
detection zone will be displayed on the live page.
● Enter No.: An alarm is triggered when the number of people
entering the detection zone exceeds the defined threshold.
● Exit No.: An alarm is triggered when the number of people
leaving the detection zone exceeds the defined threshold.
● Stay No.: An alarm is triggered when the number of people
staying the detection zone exceeds the defined threshold.
under Trigger to configure alarm schedule and linkage. For details on
Figure 5-152 People counting
187
User's Manual