Analytics+ Search (Smd); Vehicle Density; Enabling Smart Plan - Dahua N41C1P User Manual

Parameter
Picture Storage
Buzzer
Log
Alarm Tone
Step 8 Click Apply.

5.9.13.3 Analytics+ Search (SMD)

You can search for and play back videos that triggered SMD alarms.
Procedure
Step 1 Select Main Menu > Analytics+ > Analytics+ Search > SMD.
Step 2 Select channel, type, start time and end time, and then click Search.
● Click
● Select a video and click Export to export video file to a USB flash drive.

5.9.14 Vehicle Density

You can configure the rules for traffic congestion and parking upper limit, , and view the
counting data on the live page.
● Traffic congestion: The system counts the vehicles in the detection area. When the
counted vehicle number and the continuous congestion time exceed the configured
values, an alarm is triggered and the system performs an alarm linkage.
● Parking upper limit: The system counts the vehicles in the detection area. When the
counted vehicle number exceeds the configured value, an alarm triggered and the system
performs an alarm linkage.

5.9.14.1 Enabling Smart Plan

To use Analytics+ by camera, you need to enable the smart plan first. For details, see "5.9.2
Smart Plan".
Description
When an alarm occurs, the system takes a snapshot of the channel
and stores the snapshot on the Device.
Make sure that snapshot schedule and snapshot mode have been
configured. For details, see "5.8.1 Recording Schedule".
The system activates the buzzer when an alarm occurs.
When an alarm occurs, the system records the event in the logs.
When an alarm occurs, the system plays the selected audio file.
Make sure that the audio files have been uploaded to the system.
For details, see "5.18.1 File Management".
to play back the video.
195
User's Manual