5.6.7.4.5 Calling AutoPan
Procedure
Step 1
On the expanded PTZ control panel, click
direction.
Step 2
Click
5.6.7.4.6 Auxiliary Button
On the expanded PTZ control panel, click
In the Shortcut Aux list, select the option that corresponds to the applied protocol.
In the Aux No. box, enter the number that corresponds to the AUX switch on the decoder.
5.6.8 Wireless Pairing
You can use the wireless pairing to quickly add IPCs to the NVR.
Make sure that the IPC and NVR are on the same network segment.
Right-click the live page, and then select Wireless Pairing. The system starts a 120-second
pairing countdown. You can see the video of the paired IPC after pairing is successful.
again to stop moving.
Figure 5-40 Auxiliary
to start moving in horizontal
.
68
User's Manual