Using Ptz Functions; Presets; Tours; Patterns - Dahua N41C1P User Manual

5.6.7.4 Using PTZ Functions

After you have configured the PTZ settings, you can use the PTZ functions from the
expanded PTZ control panel.

5.6.7.4.1 Presets

Procedure
Step 1 On the expanded PTZ control panel, in the No. box, enter the value of the preset.
Step 2 Click
Step 3 Click

5.6.7.4.2 Tours

Procedure
Step 1 On the expanded PTZ control panel, in the No. box, enter the value of the tour.
Step 2 Click
Step 3 Click

5.6.7.4.3 Patterns

Procedure
Step 1 On the expanded PTZ control panel, in the No. box, enter the value of the pattern.
Step 2 Click
The PTZ camera moves according to the configured pattern repeatedly.
Step 3 Click

5.6.7.4.4 AutoScan

Procedure
Step 1 On the expanded PTZ control panel, in the No. box, enter the value of the border.
Step 2 Click
The PTZ camera performs scanning according to the configured borders.
Step 3 Click
Figure 5-39 Expanded PTZ control panel
to call the preset.
again to stop calling the preset.
to call the tour.
again to stop calling the tour.
to call the pattern.
again to stop calling the pattern.
.
again to stop auto scanning.
67
User's Manual