Configuring Tours; Configuring Patterns - Dahua N41C1P User Manual

5.6.7.3.2 Configuring Tours

Procedure
Step 1 On the expanded PTZ control panel, click
Step 2 Click the Tour tab.
Step 3 In the Tour No. box, enter the value for the tour route.
Step 4 In the Preset box, enter the preset value.
Step 5 Click Add Preset.
A preset will be added for this tour.
● You can repeat adding more presets.
● Click Delete Preset to delete the preset for this tour. This operation can be
repeated to delete more presets. Some protocols do not support deleting.

5.6.7.3.3 Configuring Patterns

Procedure
Step 1 On the expanded PTZ control panel, click
Step 2 Click the Pattern tab.
.
Figure 5-36 Tour
.
65
User's Manual