Table of Contents
Advertisement
Parameter
Name
Sensitivity
Duration
Repeat Alarm Time
3) Click OK.
Step 5
Configure alarm schedule and linkage.
Figure 5-134 Schedule and alarm linkage
1) Click
.
2) Click Setting next to Schedule to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
● On the time line, drag to set the period.
● You can also click
3) Configure alarm linkage. For details, see Table 5-43.
4) Click Apply.
Step 6
Click Apply.
Table 5-37 Parameters of fall detection
Description
Customize the rule name.
Set alarm sensitivity.
Set the minimum time of triggering an alarm when people fall.
Set repeat alarm time. If the alarm-triggering event continues, an
alarm will be triggered again when repeat alarm time passed.
to set the period.
167
User's Manual
Advertisement
Table of Contents
