Configuring Image Settings - Dahua NVR5432-XI User Manual

5.7.3.2 Changing IP Address of Unconnected Cameras
Procedure
Select Main Menu > CAMERA > Camera List > Camera List.
Step 1
Click Search Device.
Step 2
The remote devices found are displayed at the upper pane.
Step 3 Click
When changing the IP addresses of multiple remote devices at the same time, make sure
that they share the same username and password.
Step 4 Enter username and password of the remote device, and then configure the IP address.
DHCP : The remote device gets a dynamic IP address automatically.
●
Static : You need to enter static IP address, subnet mask, and default gateway. When
●
changing IP addresses of multiple remote devices at the same time. enter the
incremental value so that the system can add the fourth decimal digit of the IP address
one by one according to the incremental value.
Click OK.
Step 5

5.7.4 Configuring Image Settings

You can set network camera parameters according to different environments to get the best video
effect.
Procedure
Step 1 Select Main Menu > CAMERA > Image.
, or select one or more remote devices and then click Modify IP.
188
User's Manual