Dahua N41C1P User Manual page 100

We recommend this method when you want to add only a few remote devices and know
their IP addresses, usernames and passwords.
Procedure
Step 1 Select Main Menu > CAMERA > Camera List > Camera List.
Step 2 (Optional) Enable H.265 Auto Switch.
When H.265 Auto Switch is enabled, the video compression standard of added
remote devices is switched to H.265 automatically.
Step 3 Click Manual Add.
Step 4 Configure the parameters.
The parameters might vary depending on the manufacturer that you select.
Parameter
Channel
Manufacturer
IP Address
Figure 5-56 Manual add
Table 5-15 Remote channel parameters
Description
Select the channel that you want use on the Device to
connect the remote device.
Select the manufacturer of the remote device.
Enter the IP address of the remote device.
84
User's Manual