Live View Control Bar - Dahua N41C1P User Manual

Icon

5.6.3 Live View Control Bar

Point to the top center of the video of current channel; and then the live view control bar
appears.
If your mouse stays in this area for more than 6 seconds and has no operation, the control
bar automatically hides.
Function
Select view layout.
Go to the previous screen.
Go to the next screen.
Enable tour function. The icon switches to
If you close the tour or the triggered tour operation has
canceled, the Device restores the previous preview video.
Open the PTZ control panel. For details, see "5.6.7.2 PTZ
Control".
Configure image settings. For details, see "5.7.4 Configuring
Image Settings".
This function is supported only in single-channel layout.
Search for records. For detail, see "5.8.2.1 Search Page".
Open the Voice Broadcast page. For detail, see"5.18.3
Broadcast".
Open the Alarm Status interface to view the device alarm
status. For details, see "5.10.2 Alarm Status".
Open the Channel Info interface to display the information
of each channel.
Open the Add Camera page..
Open the NETWORK page. For details, see "5.19.3 Network".
Open the Disk Manager page. For details, see "5.12.2 Disk
Manager".
Open the USB Management page. You can view USB
information, back up files, and update the system.
Switch to the sub screen.
46
User's Manual
.