1) Click
2) Click Setting next to Schedule to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
● On the time line, drag to set the period.
● You can also click
3) Configure alarm linkage. For details, see Table 5-43.
4) Click Apply.
Step 7
Select Enable checkbox and then click Apply.
5.9.6.2.7 Missing Object Detection
Background Information
The system generates an alarm when there is missing object in the specified zone.
Procedure
Step 1
Select Main Menu > Analytics+ > Parameters > IVS.
Figure 5-125 Schedule and alarm linkage
.
to set the period.
157
User's Manual