Analytics+ Search (Anpr); Crowd Distribution; Enabling Smart Plan; Configuring Crowd Distribution - Dahua N41C1P User Manual

Step 4 Click General (default), Blocklist or Allowlist tab.
Before enabling the blocklist alarm or allowlist alarm, you need to add the
corresponding plate information.
● General: The system triggers an alarm when it detects any plate number.
● Block List: The system triggers an alarm when it detects plate number on the
blocklist.
● Allow List: The system triggers an alarm when it detects plate number on the
allowlist.
Step 5 Click Setting next to Schedule to configure the arming period.
The system triggers corresponding alarm actions only during the arming period.
● On the time line, drag to set the period.
● You can also click
Step 6 Configure alarm linkage actions. For details, see Step7.
Step 7 Click Apply.

5.9.9.3 Analytics+ Search (ANPR)

You can search for the ANPR detection results. For details, see "5.9.8.3.2 Motor Vehicle
Detection".

5.9.10 Crowd Distribution

The system detects the crowd distribution. When the crowd density exceeds the defined
threshold, an alarm is triggered.

5.9.10.1 Enabling Smart Plan

To use Analytics+ by camera, you need to enable the smart plan first. For details, see "5.9.2
Smart Plan".

5.9.10.2 Configuring Crowd Distribution

Configure the alarm rules of crowd distribution detection.
Prerequisites
Make sure that the connected camera supports the crowd distribution function.
Background Information
Procedure
Step 1 Select Main Menu > Analytics+ > Parameters > Crowd Distribution.
to set the period.
183
User's Manual