Table of Contents
Advertisement
Step 2
Click
Step 3
Configure the parameters.
Function
Server Address
Port
Sub-Device ID
Step 4
Click Apply.
5.11.17 Switch
Background Information
After setting Switch, when an IPC is connected to the PoE port, the system automatically
assigns the IP address to the IPC according to the defined IP segment, and the NVR will
automatically connect to the IPC.
Figure 5-200 Register
to enable the function.
Table 5-63 Register parameters
Description
Enter the IP address or domain name of the server that you
want to register to.
Enter the port of the server.
Enter the ID allocated by the server.
242
User's Manual
Advertisement
Table of Contents
