Dahua N41C1P User Manual page 149

Step 3 Click Setting next to Schedule to configure arming periods. The corresponding
alarm actions are linked by the alarm events triggered during armed period.
Step 4 Arm target face database.
● General Alarm: The alarm is triggered when the similarity of detected faces
reaches the defined value.
1. Select General Alarm in Analytics+ Mode.
2. Click Setting next to Target Face Database.
3. Select the face database that you want to arm, and then click OK.
4. Click
5. Click
● Stranger Alarm: The alarm is triggered when the similarity of detected faces
does not reach the defined value.
Figure 5-99 Analytics+ by recorder
to modify similarity.
to configure alarm linkages.
133
User's Manual