Table of Contents
Advertisement
Step 2
Select a channel and Analytics+ type.
Step 3
Click
Step 4
Configure the sensitivity.
The higher the value, the easier it is to trigger an alarm. But meanwhile, the false
alarm might occur. The default value is recommended.
Step 5
Select effective target from Human and Motor Vehicle.
Step 6
Click Setting next to schedule to configure the alarm period.
Step 7
Configure alarm linkage.
Parameter
Anti-Dither
Alarm-out Port
Figure 5-159 SMD
to enable the function.
Table 5-43 Alarm linkage parameters
Description
The system records only one motion detection event within the
defined period.
When an alarm occurs, the NVR links the alarm output device to
193
User's Manual
Advertisement
Table of Contents
