Table of Contents
Advertisement
Step 2
Click
Step 3
Select a firewall mode.
● Allow List: The hosts on the allowlist can access the Device.
● Block List: The hosts on the blocklist are prohibited to access the Device.
Step 4
Click Add and then select a type for the allowlist or blocklist.
You can allow or prohibit hosts through a specific IP address, a network segment, or
a MAC address.
● IP address.
Enter the IP address, start port and end port, and then click OK.
● IP segment.
Enter the start address and end address, starting port and ending port, and then
click OK.
● MAC address.
Enter the MAC address, and then click OK.
Step 5
Click Apply.
Figure 5-243 Firewall
to enable the firewall.
282
User's Manual
Advertisement
Table of Contents
