Table of Contents
Advertisement
Technical Manual
Push-button 55 / Plus 55 [BE-TA55xx.x2]
There are 2 text fields available:
Figure 5: Text fields – Function/Object description + Additional text
Texts with up to 40 characters can be stored for both fields.
The text entered in "Function/Object description" appears both in the menu behind the corresponding
logic and with the communication objects of the logic:
Figure 6: Function/Object description
The "Additional text" is merely additional information to the logic. This is not visible anywhere else.
If a logic operation is fulfilled, a value or a scene can be sent according to the selected object type.
Only for the object type "Switch" can a sending condition or a sending filter be defined for the output. The
logic operation can, for example, send with every input telegram, only send when the output of the logic
operation changes, or a sending filter can be activated. In this case, only a "1" or a "0" is sent when the
output changes. If the setting is "not automatic", no output value is sent, but it can be requested.
In addition, with the object type "Switch" the output can be inverted and thus a "0" can be made into a "1"
and a "1" into a "0".
The table shows the available communication objects:
Number
Name / Object function
* 22/42/62/82
Logic 1 – Output: Switch,
Output: Value, Output: Scene
Table 41: Communication objects – Logic output
* Object numbers depend on the device version (number of buttons).
MDT technologies GmbH · Papiermühle 1 · 51766 Engelskirchen · Germany
Phone +49 (0) 2263 880 · knx@mdt.de · www.mdt.de
Length
Usage
Output of the logic operation. DPT
according to parameter setting
44 / 49
Advertisement
Table of Contents
