Reboot; Restore And Default; Upgrade - HIKVISION DS-2XS6A87G1-LS/4G User Manual

9.7 Reboot

You can reboot the device via browser.
Go to Configuration → System → Maintenance → Upgrade & Maintenance , and click Reboot.

9.8 Restore and Default

Restore and Default helps restore the device parameters to the default settings.
Steps
1. Go to Configuration → System → Maintenance → Upgrade & Maintenance .
2. Click Restore or Default according to your needs.
Restore Reset device parameters, except user information, IP parameters and video format
to the default settings.
Default Reset all the parameters to the factory default.
Be careful when using this function. After resetting to the factory default, all the
parameters are reset to the default settings.

9.9 Upgrade

Before You Start
You need to obtain the correct upgrade package.
Caution
DO NOT disconnect power during the process, and the device reboots automatically after upgrade.
Steps
1. Go to Configuration → System → Maintenance → Upgrade & Maintenance .
2. Choose one method to upgrade.
Firmware
Firmware Directory Locate the directory which the upgrade file belongs to.
3. Click Browse to select the upgrade file.
4. Click Upgrade.
Network Camera User Manual
Note
Locate the exact path of the upgrade file.
75