Table of Contents
Advertisement
Before You Start
Go to VCA and select the application. Select Face Capture and click Next to enable the function.
●
For the device supporting HEOP, go to VCA to import and enable Face Capture.
●
Steps
1. Go to VCA → Set Application → Face Capture → Rule .
2. Check Enable to enable the rule settings.
3. Click
to draw the detection area you want the face capture to take effect. Draw area by left-
clicking end-points in the live view window, and right-clicking to finish the area drawing. It is
recommended that the drawn area occupies 1/2 to 2/3 of the live view image.
4. Draw pupil distance.
Min. Pupil Distance
Click
to draw the minimum pupil distance. If the pupil distance of the face in the video
image is smaller than the minimum pupil distance, the face will not be detected.
Max. Pupil Distance
Click
to draw the maximum pupil distance. If the pupil distance of the face in the video
image is larger than the maximum pupil distance, the face will not be detected.
You can also input the value of distance in the text field.
5. Optional: For shield region settings, refer to Set Shield Region .
6. For the arming schedule settings, refer to Set Arming Schedule . For the linkage method settings,
refer to Linkage Method Settings .
7. Click Save.
8. For overlay and capture settings, refer to Overlay and Capture . For advanced parameters
settings, refer to Face Capture Algorithms Parameters .
Result
You can view and download captured pictures in Playback → Picture . Refer to View and
Download Picture for details.
10.4.2 Overlay and Capture
Choose to configure capture parameters and the information you want to display on stream and
picture.
Display VCA info. on Stream
Display smart information on stream, including the target and rules information.
Display Target info. on Alarm Picture
Overlay the alarm picture with target information.
Background Picture Settings
Network Camera User Manual
86
Advertisement
Table of Contents
