HIKVISION DS-2XC6285G0-L User Manual page 34

When you select this mode after enabling certain smart events or motion detection, in the
night state, the default supplement light mode is IR supplement light mode. When the alarm
is triggered, the white light is enabled and the device captures the target. After the alarm
ends, the supplement light mode will switch to IR supplement light mode.
Only device models with IR and white light or hybrid supplement light with IR and white light
support this function.
Off
Supplement light is disabled.
Note
The supplement light mode may vary according to different device models.
Brightness Adjustment Mode
Auto
The brightness adjusts according to the actual environment automatically.
Manual
You can drag the slider or set value to adjust the brightness.
BLC
If you focus on an object against strong backlight, the object will be too dark to be seen clearly. BLC
(backlight compensation) compensates light to the object in the front to make it clear. If BLC mode
is set as Custom, you can draw a red rectangle on the live view image as the BLC area.
WDR
The WDR (Wide Dynamic Range) function helps the camera provide clear images in environment
with strong illumination differences.
When there are both very bright and very dark areas simultaneously in the field of view, you can
enable the WDR function and set the level. WDR automatically balances the brightness level of the
whole image and provides clear images with more details.
Note
When WDR is enabled, some other functions may be not supported. Refer to the actual interface
for details.
Network Camera User Manual
20