Chapter 11 Eptz; Patrol; Auto-Tracking - HIKVISION DS-2XC6285G0-L User Manual

EPTZ (Electronic PTZ) is a high-resolution function that digitally zooms and pans into portions of the
image, with no physical camera movement. If you want to use the EPTZ function, make sure your
device supports the Third Stream. Third stream and EPTZ should be both enabled simultaneously.
Note
The function is only supported by certain device models.

11.1 Patrol

Steps
1. Go to Configuration → EPTZ .
2. Check Enable.
3. The default Stream Type is Third Stream and cannot be configured.
4. Select Patrol in Application Mode.
5. Click Save.
What to do next
For the detailed information about the patrol settings, see the PTZ operations on live view page.

11.2 Auto-Tracking

Steps
1. Go to Configuration → EPTZ .
2. Check Enable.
3. The default Stream Type is Third Stream and cannot be configured.
4. Select Auto-tracking in Application Mode.
5. Click to start drawing. Click on the live view video to specify the four vertexes of the detection
area, and right click to complete drawing.
6. Set rules.
Detection Target
Human and vehicle are available. If the detection target is not selected, all the detected
targets will be tracked, including the human and vehicle.
Note
Only certain camera models support this function.
Sensitivity
Network Camera User Manual

Chapter 11 EPTZ

97