People Counting; Set People Counting Rule - HIKVISION DS-2XC6285G0-L User Manual

Version
It stands for the current algorithm version.
Algorithm Mode
Select a mode according to the installation scene.
Filter
Target Size
It stands for the size of the target detection window. A target larger than this pixel can be
counted as a real target. It can remove the false alarm of a certain fixed target.
Displacement
It stands for target displacement or the target width. A target will not be counted if its
displacement is less than the set percentage.
Min. Waiting Duration
Waiting time shorter than the set value will be filtered.
Confidence
The higher the threshold is, the more difficult a target will be detected, but the higher the
accuracy is.
Note
The filtering settings should be operated by the professionals. The filter settings can adjust the
algorithm for detection to change the detection range, sensitivity, etc.

10.6 People Counting

People counting is used to calculate the number of people entering or exiting an area.
Note
For certain device models, you need to enable People Counting on VCA page first.
●
The function is only supported by certain device models.
●

10.6.1 Set People Counting Rule

After setting the detection rules and algorithm parameters, the device calculates the number of
people entering or exiting in the rule area, triggers linkage actions and uploads data automatically.
Before You Start
Go to VCA and select the application. Select People Counting and click Next to enable the
●
function.
For the device supporting HEOP, go to VCA to import and enable People Counting.
●
Network Camera User Manual
94