Table of Contents
Advertisement
It displays the real-time people number in the live view window. You can drag the mouse to
adjust the OSD window location.
Alarm Times Per Exception
It refers to the alarm times after an alarm is triggered. If you do not check it and set the
times, the device will keep sending alarms.
Alarm Interval
Within the set Alarm Interval, the same alarm will not be uploaded.
First Alarm Delay
When the first alarm is triggered, the alarm will be uploaded after a set time period.
4. Click
to draw a region in the live view window, left click the end-points in the live view
window to define the boundary of the set rule region, and right click to finish drawing.
Note
Up to 8 regions can be set at the same time.
●
Try not to overlap the regions.
●
5. Check Regional People Exception Alarm, and set Alarm Trigger Condition and Alarm Threshold.
Note
After enabling Ignore Situation of No People, the device will not trigger an alarm when there
●
is no people in the region.
This function can filter the potential alarm condition under which the value is less than the set
●
Alarm Threshold and no people in the region.
6. Set arming schedule. See Set Arming Schedule .
7. Set linkage method. See Linkage Method Settings .
8. Click Save.
9. Optional: Set text overlay. For detailed settings, refer to Overlay and Capture .
10. Optional: View version and set filtering condition. For detailed settings, refer to Advanced
Settings .
Waiting Time Exception Detection
This function detects the waiting time of the set rule region and an alarm is triggered when the
waiting time meets the alarm-triggering condition.
Before You Start
Go to VCA → Select Application , select People Management and click Next to enable the
●
function.
For the device supporting HEOP, go to VCA to import and enable People Management.
●
Steps
1. Go to VCA → Set Application → People Management → Regional People Counting → Rule .
Network Camera User Manual
92
Advertisement
Table of Contents
