Trigger Alarm Output - HIKVISION DS-2XC6285G0-L User Manual

7.2.1 Trigger Alarm Output

If the device has been connected to an alarm output device, and the alarm output No. has been
configured, the device sends alarm information to the connected alarm output device when an
alarm is triggered.
Steps
1. Go to Configuration → Event → Alarm Setting → Alarm Output .
2. Set alarm output parameters.
Automatic Alarm For the information about the configuration, see Automatic Alarm .
Manual Alarm
Manual Alarm
You can trigger an alarm output manually.
Before You Start
Make sure the alarm output device is connected to the device.
Steps
1. Select the Alarm Output No. according to the alarm interface connected to the external alarm
device. Click to set alarm parameters.
Alarm Name
Custom a name for the alarm output.
2. Click Manual Alarm to enable manual alarm output.
3. Optional: Click Clear Alarm to disable manual alarm output.
Automatic Alarm
Set the automatic alarm parameters, then the device triggers an alarm output automatically in the
set arming schedule.
Before You Start
Make sure the alarm output device is connected to the device.
Steps
1. Select the Alarm Output No. according to the alarm interface connected to the external alarm
device. Click to set alarm parameters.
Alarm Name
Custom a name for the alarm output.
Delay
It refers to the time duration that the alarm output remains after an alarm occurs.
Network Camera User Manual
For the information about the configuration, see Manual Alarm .
44