Advertisement
Quick Links
Advertisement
Related Manuals for HIKVISION DS-2XC6142FWD-IS
Summary of Contents for HIKVISION DS-2XC6142FWD-IS
- Page 1 Anti-Corrosion Network Dome Camera Quick Start Guide...
- Page 2 Network Dome Camera·Quick Start Guide © 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its affiliates (hereinafter referred to as "Hikvision"), and it cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision.
- Page 3 SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,...
- Page 4 Network Dome Camera·Quick Start Guide PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN...
- Page 5 Network Dome Camera·Quick Start Guide encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Page 6 Network Dome Camera·Quick Start Guide 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).
- Page 7 Network Dome Camera·Quick Start Guide Warnings Cautions Warnings Follow these Cautions Follow these safeguards to prevent precautions to prevent serious injury or death. potential injury or material damage. Warnings ● CAUTION: Hot parts! Burned fingers when handling the parts. Wait one-half hour after switching off before handling parts.
- Page 8 Network Dome Camera·Quick Start Guide ● The power source should meet limited power source or PS2 requirements according to IEC 60950-1 or IEC 62368-1 standard. ● Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire hazard. ●...
- Page 9 Network Dome Camera·Quick Start Guide ● The sensor may be burned out by a laser beam, so when any laser equipment is in using, make sure that the surface of sensor will not be exposed to the laser beam. ● Do not place the camera in extremely hot, cold (the operating temperature shall be-30°C to +60°C, or -40°C to +60°C if the camera model has an “H”...
- Page 10 Network Dome Camera·Quick Start Guide AU REBUT LES BATTERIES USAGÉES CONFORMÉMENT AUX INSTRUCTIONS ● Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types). ● Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion.
-
Page 11: Table Of Contents
Network Dome Camera·Quick Start Guide Table of Contents 1 Appearance Description ............... 11 2 Installation ..................13 Install Memory Card ............14 Ceiling Mounting ............15 Wall Mounting .............. 19 3 Activate and Access Network Camera .......... 22... -
Page 12: Appearance Description
Network Dome Camera·Quick Start Guide 1 Appearance Description The overview of the anti-corrosion dome camera is shown below: Overview... - Page 13 Network Dome Camera·Quick Start Guide Description Description Description Front cover Photoresistor Lens IR lights Dome drive Reset button Memory card slot Power supply (DC 12V) Alarm input and RJ45 network interface output interface Side outlet Note: RESET operation with reset button: press and hold the reset button for at least 10 s when camera is powering on.
-
Page 14: Installation
Network Dome Camera·Quick Start Guide 2 Installation Before you start: ● Make sure the device in the package is in good condition and all the assembly parts are included. ● The standard power supply is 12V DC, please make sure your power supply matches with your camera. -
Page 15: Install Memory Card
Network Dome Camera·Quick Start Guide Install Memory Card Steps: Unscrew the front cover with supplied Allen wrench to expose the memory card slot. Allen Wrench Front Cover Memory Card Slot Unscrew Front Cover Insert the memory card into the memory card slot. -
Page 16: Ceiling Mounting
Network Dome Camera·Quick Start Guide Insert Memory Card (Optional) If you need to unmount the memory card, push to get it ejected. Ceiling Mounting Steps: Paste the drill template to the desired mounting place. - Page 17 Network Dome Camera·Quick Start Guide Code: 102010928 Drill Template Drill three screw holes according to Hole 1 on the drill template and plan cable routing. Note: If you choose to route cable through ceiling, drill a cable hole according to Hole A. Range the drill template, the supplied shock-absorbing pad, and the camera base in the shown order.
- Page 18 Network Dome Camera·Quick Start Guide Drill Template Shock-Absorbing Camera Base Install Camera Adjust surveillance angle. See Figure 2-5. Stick the supplied plastic ring in the dome drive. Connect the cables and power on the camera to view live view image. Hole and move the plastic ring to adjust the panning, tilting and rotating position to desired place.
- Page 19 Network Dome Camera·Quick Start Guide Pan: -30° to +30° Plastic Ring Rotate: 0° to 360° Tilt: 0° to 75° Adjust Surveillance Angle Install the front cover back to the camera. Install Front Cover...
-
Page 20: Wall Mounting
Network Dome Camera·Quick Start Guide Wall Mounting Before You Start: Wall mounting bracket is not included in package. You need to prepare one in advance if you adopt this mounting type. The shown bracket below is only for demonstration. Wall Mounting Bracket Steps: 1. - Page 21 Network Dome Camera·Quick Start Guide 2. Drill 4 screw holes according to Hole 1 on the template. 3. Insert supplied expansion bolts. Unscrew the nuts and gaskets. Insert Expansion Bolts 4. Range the wall mounting bracket, the supplied shock-absorbing pad, and the camera in the shown order. Route the cable and secure them with three screws.
- Page 22 Network Dome Camera·Quick Start Guide 5. Hang the bracket to the bolts. Fix the wall mounting bracket to wall with gaskets and nuts. Fix Wall Mounting Bracket to Wall 6. Unscrew the front cover to mount memory card, and adjust surveillance angle.
-
Page 23: Activate And Access Network Camera
Network Dome Camera·Quick Start Guide 3 Activate and Access Network Camera Scan the QR code to get Activate and Access Network Camera. Note that mobile data charges may apply if Wi-Fi is unavailable. - Page 24 UD04286B-A...