Normal Mode - HIKVISION DS-2XC6285G0-L User Manual

The system switches day/night mode according to the schedule. It switches to day mode
during the set periods and switches to night mode during the other periods.
Sensitivity
The higher the value of sensitivity is, the more sensitive the motion detection is. If scheduled
image settings is enabled, the sensitivity of day and night can be set separately.
3. Select an Area and click
mouse to finish drawing one area.
4. Click to clear all the areas.
5. Click Save.
6. Optional: Repeat above steps to set multiple areas.

6.1.2 Normal Mode

You can set motion detection parameters according to the device default parameters.
Steps
1. Select Normal Mode in Configuration.
2. Set the Sensitivity of normal mode. The higher the value of sensitivity is, the more sensitive the
motion detection is. If the sensitivity is set to 0, motion detection and dynamic analysis do not
take effect.
3. Set Detection Target. Human and vehicle are available. If the detection target is not selected, all
the detected targets will be reported, including the human and vehicle. This function allows
alarm triggering by specified target types (human and vehicle).
Network Camera User Manual
. Click and drag the mouse on the live image and then release the
Figure 6-1 Set Rules
37