Table of Contents
Advertisement
3) Optional: Click
4. Set parameters.
Sensitivity
Sensitivity stands for the percentage of the body part of an acceptable target that enters the
predefined region. Sensitivity = 100 - S1/ST × 100. S1 stands for the target body part that goes
across the predefined region. ST stands for the complete target body. The higher the value of
sensitivity is, the more easily the alarm can be triggered.
Threshold
It stands for the time of the objects left in the region. Alarm is triggered after the object is left
and stays in the region for the set time period.
5. Optional: You can set the parameters of multiple areas by repeating the above steps.
6. For the arming schedule settings, refer to Set Arming Schedule . For the linkage method settings,
refer to Linkage Method Settings .
7. Click Save.
Note
The function is only supported by certain models. The actual display varies with the models.
Network Camera User Manual
to delete all the setting areas.
Figure 10-5 Set Rule
83
Advertisement
Table of Contents
