HIKVISION DS-2XC6285G0-L User Manual page 105

Scheduled Uploading
The device uploads people density information within the set statistics cycle.
Number of People Change Upload
The device uploads the people change information if there is any change in the set rule
region.
Congestion Level Upload
The device uploads the congestion information when there is any change of congestion level
in the set rule region.
Density Level
Number of People
The range for each level by inputting the lower limit of the number of people in the set
rule region.
Custom Name
The name of the level.
Note
Set the Number of People before the Custom Name.
●
Up to three levels can be configured. The density increases from level 1 to level 3.
●
6. Set arming schedule. See Set Arming Schedule .
7. Set linkage method. See Linkage Method Settings .
8. Click Save.
9. Optional: Set text overlay. For detailed settings, refer to Overlay and Capture .
10. Optional: View version and set filtering condition. For detailed settings, refer to Advanced
Settings .
Set People Exception Detection
This function detects the people number in the set rule region and an alarm is triggered when the
situation meets the alarm-triggering condition.
Before You Start
Go to VCA → Select Application , select People Management and click Next to enable the
●
function.
For the device supporting HEOP, go to VCA to import and enable People Management.
●
Steps
1. Go to VCA → Set Application → People Management → Regional People Counting → Rule .
2. Click Add to add a rule and set its name.
3. Set a rule.
People Number OSD
Network Camera User Manual
91