Table of Contents
Advertisement
3.4.2 Operate Manual Face Capture
Capture the target face manually in live view image.
Steps
1. Click Live View.
2. Click
to start manual face capture.
3. Draw a frame to select the target face in live view image.
The captured picture can be uploaded to the center.
4. Click the icon again to stop manual face capture.
3.4.3 Overlay and Capture
Choose to configure capture parameters and the information you want to display on stream and
picture.
Display VCA Info. on Stream
Display smart information on stream, including the target and rules information.
Display Target Info. on Alarm Picture
Overlay the alarm picture with target information.
Target Picture Settings
You can set the face picture type by selecting Custom, Head Shot, Half-Body Shot, or Full-Body
Shot. If you select Custom, you can define detailed picture width and height of a picture freely.
If the captured pictures should have the same picture height, check Fixed Value and input
desired picture height.
Face Beautification
Check Face Beautification and adjust the beautification level as needed.
Note
Face Beautification slightly adjusts skin tone and reduces facial noise.
Face Enhancement
Check Face Enhancement and the device is able to capture better and clearer face pictures
when it is dark.
Background Picture Settings
Comparing to target picture, background picture is the scene image offers extra environmental
information. You can set the background picture quality and resolution. If the background image
need to be uploaded to surveillance center, check Background Upload.
Text Overlay
Network Speed Dome User Manual
14
Advertisement
Table of Contents
