Table of Contents
Advertisement
2-1 Overview
This chapter provides a quick setup checklist to get your SuperWorkstation
7034A-T/7034A-i up and running. Following these steps in the order given should
enable you to have the system operational in a minimal amount of time. This
quick setup assumes that your SuperWorkstation 7034A-T/7034A-i system has
come to you with the processors and memory preinstalled. If your system is not
already fully integrated with a motherboard, processors, system memory etc.,
please turn to the chapter or section noted in each step for details on installing
specific components.
2-2
Unpacking the System
You should inspect the box the SuperWorkstation 7034A-T/7034A-i was shipped
in and note if it was damaged in any way. If the workstation itself shows damage
you should file a damage claim with the carrier who delivered it.
2-3
Preparing for Setup
Choosing a Setup Location
Decide on a suitable location for the SuperWorkstation 7034A-T/7034A-i. It
should be situated in a clean, dust-free area that is well ventilated. Avoid areas
where heat, electrical noise and electromagnetic fields are generated. You will
also need it placed near a grounded power outlet. Once the system has been
placed in the appropriate location, slide the locking tabs on each caster down to
keep it stationary.
Chapter 2
Server Installation
2-1
Chapter 2: Server Installation
Advertisement
Table of Contents
