Table of Contents
Advertisement
2.1 Overview
This chapter provides advice setting up your system. If your system is not already fully
integrated with processors, system memory etc., refer to Chapter 4 for details on installing
those specific components.
Caution: Electrostatic Discharge (ESD) can damage electronic components. To prevent such
damage to PCBs (printed circuit boards), it is important to use a grounded wrist strap, handle
all PCBs by their edges and keep them in anti-static bags when not in use.
2.2 Preparing for Setup
Precautions
•
Review the electrical and general safety precautions in
•
Use a regulating uninterruptible power supply (UPS) to protect the workstation from power
surges, voltage spikes and to keep your system operating in case of a power failure.
•
Allow any drives and the power supply unit to cool before touching them.
•
When not servicing, always keep all covers/panels on the system closed to maintain proper
cooling.
Chapter 2
System Installation
18
Chapter 2: Workstation Installation
Appendix
A.
Advertisement
Table of Contents
Troubleshooting
