Table of Contents
Advertisement
S
W
UPER
ORKSTATION 7034A-T/7034A-i Manual
Watch Dog Enable/Disable
JWD enables the Watch Dog func-
tion. Watch Dog is a system moni-
tor that can reboot the system when
a software application is "hung up".
Pins 1-2 will cause WD to reset the
system if an application is hung up.
Pins 2-3 will generate a non-
maskable interrupt signal for the ap-
plication that is hung up. See the
table on the right for jumper settings.
Watch Dog can also be enabled via
BIOS.
Note: When enabled, the user needs
to write his own application software
in order to disable the Watch Dog
Timer.
AC'97 Audio Enable/Disable
AC'97 provides high quality onboard au-
dio. The X6DAL-TG/X6DAL-G features
6-channel sound for front L&R, rear L&R,
center and subwoofer speakers. This
feature is activated with the Advanced
software on the CD-ROM included with
your serverboard. The Line In, Line Out
and MIC jacks (see at right) may then
be used. Activate AC 97 with the "AC
97 Audio" setting in the Advanced
Chipset Features section of BIOS.
Jumper Settings (JWD)
Jumper
Position
Pins 1-2
Pins 2-3
Open
5-20
Watch Dog
Definition
WD to Reset
WD to NMI
Disabled
Blue: Line In (surround
sound L/R)
Green: Line Out
(front L/R)
Pink: MIC In (center/
subwoofer)
Advertisement
Table of Contents
