5-11 Floppy And Hard Disk Drive Connections; Floppy Connector - Supermicro 7034A-T User Manual

Supermicro superworkstation 7034a-t servers: user guide
Table of Contents

Advertisement

S
W
UPER
ORKSTATION 7034A-T/7034A-i Manual

5-11 Floppy and Hard Disk Drive Connections

Note the following when connecting the floppy and hard disk drive cables:
• The floppy disk drive cable has seven twisted wires.
• A red mark on a wire typically designates the location of pin 1.
• A single floppy disk drive ribbon cable has 34 wires and two connectors
to provide for two floppy disk drives.
always connects to drive A, and the connector that does not have
twisted wires always connects to drive B.

Floppy Connector

The floppy connector is located on
JD1. See the table below for pin
definitions.
The connector with twisted wires
Floppy Connector Pin Definitions (JD1)
Pin Number
Function
Pin Number
1
GND
3
GND
5
Key
7
GND
9
GND
11
GND
13
GND
15
GND
17
GND
19
GND
21
GND
23
GND
25
GND
27
GND
29
GND
31
GND
33
GND
5-22
Function
2
FDHDIN
4
Reserved
6
FDEDIN
8
Index-
10
Motor Enable
12
Drive Select B-
14
Drive Select A-
16
Motor Enable
18
DIR-
20
STEP-
22
Write Data-
24
Write Gate-
26
Track 00-
28
Write Protect-
30
Read Data-
32
Side 1 Select-
34
Diskette

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superworkstation 7034a-i

Table of Contents