Table of Contents
Advertisement
GLAN Enable/Disable
Change the setting of jumper JPL1 to
enable or disable the onboard GLAN
ports (GLAN1 and GLAN2) on the
serverboard. See the table on the
right for jumper settings. The default
setting is enabled
Audio Enable/Disable
J26 enables or disables the Audio
Connector on the serverboard. See
the table on the right for jumper set-
tings. The default setting is enabled.
Alarm Reset
The system will notify you in the
event of a power supply failure. This
feature assumes that Supermicro
redundant power supply units are
installed in the chassis. If you only
have a single power supply installed,
you should disable this (the default
setting) with CN1 to prevent false
alarms. See the table on the right for
jumper settings.
Power Force On Enable/
Disable
Jumper JPF allows you to enable or
disable the Power Force On function.
If enabled, the power will always stay
on automatically. If this function dis-
abled, the user needs to press the
power button to power on the system.
Chapter 5: Advanced Serverboard Setup
Jumper
Position
Pins 1-2
Pins 2-3
Jumper
Position
Pins 1-2
Pins 2-3
Alarm Reset Jumper
Jumper
Position
Open
Closed
Force Power On
Jumper
Position
Open
Closed
5-19
GLAN
Enable/Disable
Jumper Settings
(JPL1)
Definition
Enabled
Disabled
Audio
Enable/Disable
Jumper Settings
(J26)
Definition
Enabled
Disabled
Settings
(CN1)
Definition
Enabled
Disabled
(JPF)
Definition
Normal
Force On
Advertisement
Table of Contents
