S
W
UPER
ORKSTATION 7034A-T/7034A-i Manual
2.
Mounting a SATA drive in a drive carrier:
The SATA drives are mounted in drive carriers to simplify their installation
and removal from the chassis. These carriers also work to promote
proper airflow for the system.
For this reason, even carriers without
SATA drives must remain in the server. If you need to add a new SATA
drive, insert the drive into the carrier with the printed circuit board side
facing down so that the mounting holes align with those in the carrier.
Secure the drive to the carrier with four screws.
Figure 6-6.
Removing an SATA Drive Carrier
6-8