Table of Contents
Advertisement
Chapter 7: BIOS
ATA(PI) 80Pin Cable Detection
This feature allows the AMI BIOS to auto-detect 80Pin ATA(PI) Cable. The
options are: Host & Device, Host and Device.
Floppy Configuration
This option allows the user to configure the settings for the Floppy Drives
installed in the system.
Floppy A
Move the cursor to these fields via up and down <arrow> keys to select
the floppy type. The options are Disabled, 360 KB 5 1/4", 1.2 MB 5 1/4",
720 KB 3½", 1.44 MB 3½", and 2.88 MB 3½". Default setting for Floppy
A drive is 1.44 MB 3½".
OnBoard Floppy Controller
Select "Enabled" to enable the Onboard Floppy Controller. The options are
"Disabled", and "Enabled."
7-9
Advertisement
Table of Contents
