Supermicro 7034A-T User Manual page 70

S W
UPER ORKSTATION 7034A-T/7034A-i Manual
S-ATA Ports Definition
This feature allows the user to configure Serial ATA Ports. The
options are: P0-Master/P1-Slave, P0-Slave/P1-Master
P-ATA Only
S-ATA Running Enhanced Mode
Select Yes if you want the function of Serial ATA Enanced Mode to
be enabled at all times. Options are Yes and No.
P-ATA Channel Selection
This feature allows the user to select which channel to set the
Parallel ATA Mode. The options are: Primary, Secondary or Both.
S-ATA Ports Definition
This feature allows the user to configure Serial ATA Ports. The
options are: P0-3rd/P1-4th, P0-4th/P1-3rd
Configuring S-ATA as RAID
Select Yes to configure Serial ATA as RAID. The options are Yes,
and No.
S-ATA Only
S-ATA Ports Definition
This feature allows the user to configure Serial ATA Ports. The
options are: P0-1st/P1-2nd, P0-2nd/P1-1st
Primary IDE Master/Slave, Secondary IDE Master/Slave, Third
IDE Master/Slave, Fourth IDE Master/Slave Sub Menu
From the Advanced Setup screen, press <Enter> to access this sub menu
for the primary, secondary, third and fourth IDE master and slave drives.
Use this screen to select options for the Primary and Secondary IDE drives.
Use the up and down <Arrow> keys to select an item. Use the <Plus> and
<Minus> keys to change the value of the selected option.
Type
Select the type of device connected to the system. The options are Not
Installed, Auto, CDROM and ARMD.
.
.
7-6
.