Table of Contents
Advertisement
Chapter 7: BIOS
Boot up Num-Lock
Set this value to allow the Number Lock setting to be modified during boot
up. The default setting is On. The options are On and Off.
PS/2 Mouse Support
Set this value to allow the PS/2 mouse support to be modified. The options
are Auto, Enabled and Disabled.
Wait for 'F1' If Error
Select Enable to activate the function of Wait for F1 if Error. The options
are Enabled and Disabled.
Hit 'DEL' Message Display
Select Enabled to display Setup Message when the user hits the DEL key.
The options are Enabled and Disabled.
Interrupt 19 Capture
Select Enabled to allow ROMs to trap Interrupt 19. The options are Enabled
and Disabled.
7-21
Advertisement
Table of Contents
