Table of Contents
Advertisement
Fan Headers
There are six fan headers (FAN1-
FAN6) on the X6DAL-TG/X6DAL-G.
See the table on the right for pin defi-
nitions.
Note: These fan headers are 4-pin
fans. Pins#1-#3 of the fan headers
are backward compatible with tradi-
tional 3-pin fans. Fan speed is con-
trolled by Thermal Management via a
Hardware Monitor and BIOS (Ad-
.
vanced Setting)
The default setting
is disabled. When using a Thermal
Management setting, please use all
3-pin fans or all 4-pin fans on the
serverboard. Do not use 3-pin fans
and 4-pin fans on the same board.
Serial Ports
The COM1 (J4) and COM2 (J5) serial
ports are located under the parallel
port (see Figure 5-3). See the table
on the right for pin definitions.
ATX PS/2 Keyboard and
PS/2 Mouse Ports
The ATX PS/2 keyboard and PS/2
mouse are located on J2. See the
table at right for pin definitions.
(See Figure 5-3 for the location of
each.)
Chapter 5: Advanced Serverboard Setup
Fan Header Pin Definitions
Pin #
1
2
3
4
Caution: These fan headers
Serial Port Pin Definitions
(COM1, COM2)
Pin Number Definition
1
DCD
2
DSR
3
Serial In
4
RTS
5
Serial Out
PS/2 Keyboard
and Mouse Port
Pin Definitions
Number
5-15
Definition
Ground (black)
+12V (red)
Tachometer
PWR_Control
use DC power.
Pin Number Definition
6
CTS
7
DTR
8
RI
9
Ground
10
NC
(J2)
Pin
Definition
1
Data
2
NC
3
Ground
4
VCC
5
Clock
6
NC
Advertisement
Table of Contents
