Appendix C: System Specifications - Supermicro 7034A-T User Manual

Supermicro superworkstation 7034a-t servers: user guide
Table of Contents

Advertisement

Appendix C: System Specifications

Appendix C
System Specifications
Processors
®
TM
Single or dual 604-pin Intel
Xeon
processors at a front side (system)
bus speed of 800 MHz. (Please refer to the support section of our web
site for a complete listing of supported processors: www.supermicro.com).
Chipset
Intel E7525 chipset
BIOS
®
8 MB AMI
Flash ROM
Memory Capacity
Six 184-pin DIMM sockets supporting up to 12 GB of registered ECC
DDR333 or 24 GB of registered ECC DDR266 SDRAM
Note: Interleaved memory - requires memory to be installed two at a time. See the
memory section in Chapter 5 for details.
Serial ATA Controller (7034A-T only)
Marvell SATA controller providing a four-port Serial ATA subsystem.
Peripheral Drives/Bays
One (1) 3.5" floppy drive
Two (2) 5.25" drive bays
Four (4) SATA drive bays (7034A-T only)
Expansion Slots
Chassis: Seven (7) I/O chassis slots
Serverboard: total of six (6) PCI-Express/PCI-X slots
C-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superworkstation 7034a-i

Table of Contents