Table of Contents
Advertisement
3. CONNECTIONS
3.1 Connection via HDMI or SCART
SAT IN
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
a) Connect the LNB of your satellite antenna to the SAT IN connector of your receiver using a good quality
coaxial cable and suitable 'F-connector' plugs.
b) Connect one end of a good quality HDMI cable to the HDMI connector of your receiver and the other end
to the HDMI input of your TV set.
c) Plug the power adapter jack to the receiver and the other end to a suitable wall outlet.
Optional: Connect one end of a good quality Scart cable to the TV SCART of your receiver and the other end
to the SCART input of your TV set.
3.2 Optional connection via DiSEqC 1.0 switch for up to 4 LNBs
SAT IN
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are tradem
10
Fig. 7
Fig. 8
Advertisement
Table of Contents
