Table of Contents
Advertisement
3. CONNECTIONS
3.1 Basic connection using an HDMI cable
a. Connect the LNB of your satellite antenna to the SAT IN connector of your receiver using a good quality
coax cable and suitable 'F-connector' plugs.
b. Connect one end of a good quality HDMI cable to the HDMI output on your receiver and the other end to
the HDMI input of your TV.
c. Plug the power adapter to a suitable wall outlet.
DIGITAL HD SATELLITE RECEIVER 7015
Supplied by STRONG Austria
13/18 V
500 mA max.
SAT IN
MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES.
DOLBY, DOLBY AUDIO AND THE DOUBLE-D SYMBOL ARE
TRADEMARKS OF DOLBY LABORATORIES LICENSING CORPORATION.
11
COAXIAL
S/PDIF
Fig. 6
Advertisement
Table of Contents
