Table of Contents
Advertisement
Auto Standby:
simpliTV List - Update By default, this option is set to On, to ensure that the simpliTV list is always up to date,
7.3.3 Time Settings
In this menu, you can adjust settings for the time and date
Time Settings:
Timezone:
Summer Time:
7.3.4 Timer
Use the timer function to switch to a selected programme. Press OK to open a timer.
Timer Mode:
Timer Action:
Channel:
Start Date:
Start Time:
End Time:
Standby after timer:
After nishing all settings, press pq to select Save and press OK.
NOTE:
The setting for Standby after timer applies to all timers.
7.3.5 Receiver Information
The menu contains information about the hardware and software versions of the receiver.
Amongst others you will nd the serial number, model name, loader version and the CSSN number of the
receiver. The Device-ID (Gerätenummer) can be found on the bottom of the receiver, on the packaging, in
the Client Status menu or in the technical information (3x INFO). If you need to contact our support, please
keep this information ready as it can help you and them to handle your request.
7.4 Multimedia
In this menu you can decide whether to play movies, music or look at pictures.
Use the pq buttons to select the appropriate menu, and then press K to switch to one of the submenus.
In all multimedia menus, you can use the multimedia buttons as usual.
minutes, 30 minutes, 1 hour, 3 hours and O . The receiver consumes less power than in
standby mode. To power up from deep sleep mode, it takes about 35 seconds.
This function allows you to set the hours after which the receiver should
automatically switch to standby mode. Available settings are: 1 hour, 2 hours, 3 hours,
4 hours, 5 hours, 6 hours, and O . If the receiver has not been operated during the set
time, it automatically switches to standby mode. This is an additional way to reduce
power consumption.
respectively in case of an available update, a separate message will be displayed. If
you don't like to be noti ed, set this option to O .
Select Auto to automatically synchronize the time and time zone, or Manual to set the
time manually.
The time zone can be adjusted in manual Time Settings.
This setting is only available when you set the time to Manual.
When the winter time is changing to Summer Time, it is necessary to switch Summer
Time to ON.
Use tu to select Once, Monday-Friday, Daily, Weekly or Monthly, factory setting is set
to O .
Switch On is set here to switch the receiver on at the desired time.
Press OK to open the channel list and press pq or P +/- to select the desired
channel and press OK to accept.
Enter the selected date with 0~9.
Enter the selected starting time with 0~9.
Enter the selected end of the Timer with 0~9.
Set here whether the receiver should always be in standby after the timer has expired
or whether it should always remain switched on.
23
Advertisement
Table of Contents
