Table of Contents
Advertisement
7.5 Update
In this menu you can update the receiver via USB or OTA (= Over The Air /download via satellite). Select the
desired sub-menu using the pq buttons and press OK to continue.
7.5.1 USB Software Update
This function allows you to perform a software update using a USB storage device.
Download the appropriate software and update instructions from our website www.strong-eu.com and
unzip them to your correctly formatted USB storage device. Load the le (s) into the main directory of your
USB device, then connect it to your receiver. Switch the receiver ON and wait until the storage device is
successfully detected.
1. Wait a few seconds (~ 10 sec.) until the receiver displays a message that new software is available. If no
message is displayed, please try another storage device!
2. Use the tu buttons to select OK and press OK to perform the update.
3. The receiver now changes to the update mode. Please wait until the update is completed!
4. Please remove the USB device as soon as the corresponding message is displayed on your receiver!
After the successful update you need to remove the USB device to reboot!
WARNING:
NEVER disconnect the receiver from the mains or switch the power OFF during the update
procedure. It can damage your receiver and warranty will void! In case of an USB software
update please consider that the receiver may delete all channels, data and user settings in
certain cases.
7.5.2 OTA Software Update
With the OTA (Over The Air) function, you can search for software updates via satellite. Ask your STRONG
dealer or visit our website www.strong-eu.com for more information. Only in the case of an available update
and appropriate handling the option will be available in the menu. It is possible that you can also receive
an update request after starting up the receiver. Updates which are broadcasted via OTA are intended to
improve and to enhance the product so it should be carried out in your own interest.
Press OK on the OTA Software Update menu. The receiver starts with the software search. Follow the further
instructions on screen.
WARNING:
During the update process NEVER disconnect the receiver from the mains, switch power
OFF or disconnect the receiver from the antenna cable! This can damage your receiver and
warranty will be void! In case of an OTA update please consider that the receiver may delete
all channels, data and user settings in certain cases.
7.5.3 Database backup to USB device
Use a USB storage device formatted in FAT32 and connect it to your receiver. When the USB device is
connected successfully a message will be displayed. This ensures the proper and correct function. Use OK
to con rm Database backup to USB device and con rm the next message (will only appear at rst use) with
OK for execution. Please wait for a moment. If it is completed, con rm again by pressing OK. Now remove
the USB device from the receiver. If this USB device is now connected to the PC, laptop or similar, you can
nd the directory "ORS-CCA-S2-MM_backup" there. It includes a backup of the channel lists ("FAMILY_LIST.
csv","ORF_LIST.csv","YOUNG_SPIRIT_LIST.csv" and if installed "SIMPLITV_LIST.csv"), as well as a backup of the
satellites and transponder data ("SATELLITE_INFO.csv"). You can use this data as a backup or rework it using
MS Excel for example. Please ensure to keep the le name and .csv speci c formatting. Further information
and instructions can be requested from our service and support.
7.5.4 Recover database from USB device
If you now want to import the data from the backup, created as explained above, or one of the changed
channel lists, you can import the les individually. Aussuming the le name, etc. matches and you put the
25
Advertisement
Table of Contents
