Table of Contents
Advertisement
29. 3
30. RED
31. GREEN
32. YELLOW
33. BLUE
* Depending on the System setting Recent channel list settings; allows you to call the channel list with up to 30 recently watched channels
2.5 Inserting the batteries
NOTE:
2.6 Using the remote control
NOTE:
3.0 CONNECTIONS
3.1 Connection via HDMI or SCART
a) Connect the LNB of your satellite antenna to the SAT IN connector of your receiver using a good
quality coaxial cable and suitable 'F-connector' plugs.
b) Connect one end of a good quality HDMI cable to the HDMI connector of your receiver and the
other end to the HDMI input of your TV set.
c) Plug the power adapter jack to the receiver and the other end to a suitable wall outlet.
Optional: Connect one end of a good quality Scart cable to the TV SCART of your receiver and the other
end to the SCART input of your TV set.
3.2 Optional connection via DiSEqC 1.0 switch for up to 4 LNBs
a) Connect the LNBs of your fixed antenna to the desired inputs of a DiSEqC 1.0 switch using a
good quality coaxial cable and suitable 'F-connectors'.
b) Connect the output or "to receiver" of the DiSEqC 1.0 switch to the SAT IN connector on your
receiver using a good quality coaxial cable and suitable 'F-connectors'.
c) Plug the power adapter jack to the receiver and the other end to a suitable wall outlet.
In Multimedia mode: Stops the playback of the selected file
In menu for specific functions
In menu for specific functions
In menu for specific functions
In menu for specific functions
The batteries must not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries.
The remote control will not operate if its path is blocked or affected by
bright/stroboscopic light.
Fig. 4
Fig. 5
Fig. 6
Fig. 7
7
Advertisement
Table of Contents
