Connections; Connecting The Antenna And Lnb (Low Noise Block) To The Receiver; Connection Of Multiple Xed Antennas Via Diseqc - Strong SRT 7815 User Manual

3. CONNECTIONS

This section explains the most important functions to ensure that you can directly watch television with
your new receiver. Please note additional adjustments may be required.
NOTE: Do not connect the receiver to the main power yet.

3.1 Connecting the Antenna and LNB (Low Noise Block) to the receiver

Connect the LNB of your satellite antenna to the SAT IN connector of your receiver using a good quality
coaxial cable and suitable 'F-connector' plugs.

3.1.1 Connection of multiple xed antennas via DiSEqC 1.0

IN LIZENZ VON DOLBY LABORATORIES
GEFERTIGT. DOLBY, DOLBY AUDIO
UND DAS DOPPEL-D-SYMBOL SIND
EINGETRAGENE MARKEN
DER DOLBY LABORATORIES
LICENSING CORPORATION.
IN LIZENZ VON DOLBY LABORATORIES
GEFERTIGT. DOLBY, DOLBY AUDIO
UND DAS DOPPEL-D-SYMBOL SIND
EINGETRAGENE MARKEN
DER DOLBY LABORATORIES
LICENSING CORPORATION.
10
Fig. 7 a
Fig. 7 a