Interior - Sharp MX-4100N Operation Manual

INTERIOR

(24)
(18) Toner cartridges
These contain toner for printing. When the toner runs out
in a cartridge, the cartridge of the color that ran out must
be replaced.
☞
REPLACING THE TONER CARTRIDGES
(19) Fusing unit
Heat is applied here to fuse the transferred image onto
the paper.
Caution
The fusing unit is hot. Take care not to burn yourself
when removing a paper misfeed.
(20) Transfer belt
During full color printing, the toner images of each of the
four colors on each of the photoconductive drums are
combined together on the transfer belt. During black and
white printing, only the black toner image is transferred
onto the transfer belt.
Do not touch or damage the transfer belt. This may
cause a defective image.
(21) Right side cover
Open this cover to remove a misfeed.
(22) Paper reversing section cover
This is used when 2-sided printing is performed. Open
this cover to remove a paper misfeed.
(23) Bypass tray
Use this tray to feed paper manually.
When loading paper larger than 8-1/2" x 11"R or A4R, be
sure to pull out the bypass tray extension.
☞
LOADING PAPER IN THE BYPASS TRAY
(18) (19)
(25) (26) (27) (28)
(24) Main power switch
This is used to power on the machine.
When using the fax or Internet fax functions, keep this
switch in the "on" position.
☞
(page 1-69)
(25) Waste toner box
This collects excess toner that remains after printing.
☞
Your service technician will collect the waste toner
box.
(26) Waste toner box release button
Press this button when you need to release the waste
toner box lock to replace the waste toner box or clean the
laser unit.
☞
☞
(27) Handle
Pull this out and grasp it when moving the machine.
(28) Right cover of stand/1 x 500 sheet paper drawer
Right cover of stand/2 x 500 sheet paper drawer
(when a stand/1 x 500 sheet paper drawer or a
stand/2 x 500 sheet paper drawer is installed)
Open this to remove a paper misfeed in tray 3 or tray 4.
(29) Paper tray right side cover
Open this to remove a paper misfeed in tray 1 or tray 2.
(30) Right side cover release lever
To remove a paper misfeed, pull and hold this lever up to
open the right side cover.
(page 1-34)
1-5
BEFORE USING THE MACHINE
(20) (21) (22) (23)
(29) (30)
TURNING THE POWER ON AND OFF
REPLACING THE WASTE TONER BOX
CLEANING THE LASER UNIT
REPLACING THE WASTE TONER BOX
(page 1-15)
(page 1-72)
(page 1-65)
(page 1-72)
Contents