Sharp MX-4100N Operation Manual page 172

Special Modes
Margin Shift
3
Pamphlet Copy
Covers/Inserts
Book Copy
Press the [COLOR START] key or the [BLACK & WHITE START] key.
Copying will begin.
If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and
then touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the
4
first original.)
To cancel scanning of the original and copying...
Press the [STOP] key (
• When using dual page copy, the original must be placed on the document glass.
• To erase shadows caused by the binding of a book or other bound document, use the erase function.
However, note that [Center Erase] and [Edge + Center Erase] cannot be used.
To cancel dual page copy...
Touch the [Dual Page Copy] key in the screen of step 3 so that it is not highlighted.
(2) (3)
OK
Dual Page
Erase
Copy
1
Job Tandem
2
Copy
Build
Transparency
Multi Shot
Inserts
Tab Copy Card Shot
).
Select Dual Page Copy.
(1) Touch the [Special Modes] key.
☞
SPECIAL MODES
(2) Touch the [Dual Page Copy] key so that it is
highlighted.
(3) Touch the [OK] key.
You will return to the base screen of copy mode.
2-51
COPIER
(page 2-43)
Contents